(0)

One-Touch™ Cleaning System for 22.5" models

$17.99

Rating: 4 stars

7 Reviews
Share on FacebookShare on TwitterPin to Pinterest

Product Details

Part #307444

One-Touch™ cleaning system for 22.5" charcoal grill contains(3) damper blades, (1) damper control rod, (1) H drive assembly, hardware and instruction sheet.

Dimensions: 7.8" L x 1.6" W x 0.8" H

Fits: Kits available to fit 22.5” One-Touch® , 22.5" One-Touch® Silver, Performer® and Performer with Touch-N-Go™.

In stock. See available shipping options for this item.

7 Reviews

Average Rating

Rating: 4 stars

Add Your Review

Rating: 5 stars

August 02, 2016

Randy

Replacing the One-Touch Cleaning System

I think it is quite a fabulous product. I must say that replacing the One-touch cleaning system may require a hack saw and brute force. I have owned the original Performer Grill for 23 seasons. A fine grill and the first year they were on the market. I have replaced those ash blades at least 4 times over the years and it is not easy. The new "h" bolt is an improvement but still not without alot of effort when replacing. I had to hack saw it off in 5 places after using silicone based WD-40. I also had to use a hammer and a "peg" to hammer the hacked off arm out of the h bolt. Required tools include HACK SAW, hammer, WD-40, pliers. A design improvement here is essential. The cooking is fabulous make no mistake.

Type of Griller

I am a grill master

Would you recommend this product?

Yes

Was this review helpful?

Rating: 5 stars

July 02, 2016

Mark

Just what I needed

This was a great replacement part. Went in exactly as the instructions stated.

Type of Griller

Just learning

Would you recommend this product?

Yes

Was this review helpful?

Rating: 5 stars

May 28, 2016

James

My Experience with Older Grill

My grill, while older, must have been purchased after 2000, as the replacement assembly (spoiler alert!) fit perfectly after removing the old assembly. The new assembly should be more easily replaced in the future as well (see below) as there are no parts with screw threads. My old assembly was completely rusted tight. The threaded wing nut easily snapped off while attempting to remove. Removal of the old assembly required a hand drill & 3/16" bit. With the grill upright, I drilled out the wing nut from the inside of the grill. Even though this drill hole went through the assembly handle, the handle did not release from its through hole. I then worked the long end of the handle until it snapped off at or about the just made drill hole. This provided a good starting pilot to drill out the remainder of the handle. I had to do this with the grill horizontally perched on 2 of its 3 legs. The old assembly can pivot at this point, so take care when drilling. Once the remaining portion was drilled out, the old assembly was easily released from the grill and the new assembly went in as per the illustrated instructions. No more wasted charcoal!

Type of Griller

I'm a better griller than most

Would you recommend this product?

Yes

Was this review helpful?

Rating: 4 stars

May 28, 2016

JOHN

Definite improvement

Replacement product is performing well and seems like a much better design than original thumb screw design. It did require a fair amount of effort to install on my older model grill - tight fit. The hardest part of the process was getting old 1 off since bolt was completely corroded.

Type of Griller

I'm a better griller than most

Would you recommend this product?

Yes

Was this review helpful?

Rating: 5 stars

May 12, 2016

Chris

I have a pre 2000 18 inch kettle

The problem is not the kettle. The problem is this website and lack of parts. I am looking for the three, three hole air dampers on the bottom of an 18 inch kettle, serial # EZ. Not only does your website not even know these exist, your staff is clueless to its existence also. So, I need parts for this ghost machine and i suggest you drag up some old timers that know it. I've been using this mirage kettle for 18 years and it is perfectly seasoned. Don't fail me now Webber. Chris Keen

Hi Chris! Thank you for taking the time to leave your feedback! We are glad to see our customer service team was able to help you with this issue. We love hearing feedback from our fans and we will make sure to pass this information regarding parts availability on our website along to the team. Thank you!

Type of Griller

I'm a better griller than most

Would you recommend this product?

Yes

Was this review helpful?

Rating: 1 stars

January 23, 2015

Mark

Incorrectly designed

This part was supposed to fit my One Touch Gold charcoal grill but I had to modify it significantly to work. It did not account for the thickness of the bracket that holds the cylindrical ash pan holder to the underside of the grill. I was really surprised because of the usual high quality of the parts and products provided by Weber.

Hi, Thank you for your feedback. We're sorry to learn of the trouble you ran into while attempting to replace the One-Touch Cleaning System on your grill. Based on what you described, your grill was likely made before 2000. Back then, certain models used a uniquely designed ash catcher assembly, with the support bracket bar that you noticed. All of our charcoal models made since 2000 have utilized an entirely different configuration for attaching the ash catcher. This means that One-Touch Cleaning Systems made after 2000 may not be compatible with certain pre-2000 models. Once again, we're sorry that you ran into these difficulties. Thank you!

Type of Griller

I'm a better griller than most

Would you recommend this product?

No

Was this review helpful?

Rating: 1 stars

January 12, 2015

Mark

Replacement One Touch Blades for Gold 22.5" charcoal grill

This product was ordered to replace the OneTouch sweeper blade system for my 22.5" Gold series charcoal grill. The old system had seen much use for many years and had reached the end of its useful life. I feel this replacement part has a design flaw. You stack the three blades in a specific order and insert a keyed holder through the aligned slots in the three blades. This assembly is then placed in the bottom of the grill with the bottom of the key protruding through the bottom of the grill. The cylindrical bracket that holds the ash catcher has a horizontal bracket with a hole in the middle of it that the keyed blade holder must pass through in order to secure the ash catching system to the grill. Otherwise it will just dangle by the sweeper handle. Once the keyed holder is inserted through the grill and through the ash catcher bracket, you install a H slotted washer and push the sweeper rod through the bracket and it locks in place. Nowhere in the instructions is this horizontal ash can bracket mentioned nor is it allowed for in the design making the "sandwich" too thick. Therefore the holes did not line up properly and the rod would not insert. I made it work by enlarging the holes in the keyed holder to get the rod inserted. I am a big Weber fan and recommend the charcoal grills to anyone that asks my opinion. I like that parts are available at reasonable cost for years into the future. This is a quality part that just seems to be improperly designed.

Hi, Thank you for your feedback. We're sorry to learn of the trouble you ran into while attempting to replace the One-Touch Cleaning System on your grill. Based on what you described, your grill was likely made before 2000. Back then, certain models used a uniquely designed ash catcher assembly, with the support bracket bar that you noticed. All of our charcoal models made since 2000 have utilized an entirely different configuration for attaching the ash catcher. This means that One-Touch Cleaning Systems made after 2000 may not be compatible with certain pre-2000 models. Once again, we're sorry that you ran into these difficulties. Thank you!

Type of Griller

I'm a better griller than most

Would you recommend this product?

No

Was this review helpful?

Top-Rated Accessories

Weber Original™ Q Griddle 2000 Series
Rating: 5 stars
$49.99
Master-Touch® 22" Charcoal Grill Cover with Storage Bag
Rating: 5 stars
$34.99
Weber Original™ Gourmet BBQ System Cooking Grate, Summit 400/600 series
Rating: 5 stars
$99.99

You need to be logged in before you can add items to your Wish List. Do you want to log in now?

Cancel Yes ×

Share By Email

Send family and friends your favorites. Enter one or more email addresses below. You can also include a personal message to all your recipients.

Links to the following favorites will be included in the email:

Your Name

Cancel Send ×

You need to be logged in before you can submit a review. Do you want to log in now?

Cancel Yes ×

Notify Me

Notify me when stock becomes available for .

Name

Email Address

Cancel Send ×